3com S7906E 참조 가이드

 

1-6 

Use the undo qos apply policy command to remove the policy applied on a port or a port group.  

In selective QinQ implementation on SC/SA/EA series boards, a QoS policy can be applied only to 

incoming traffic. Therefore, the qos apply policy command can be applied only on ports receiving 

traffic from the customer network.  

 

For complete information about board types, refer to the accompanied installation manual.  

 

# Apply the policy test in the inbound direction of GigabitEthernet 2/0/1.  

<Sysname> system-view 

[Sysname] interface GigabitEthernet 2/0/1 

[Sysname-GigabitEthernet2/0/1] qos apply policy test inbound 

qos policy policy-name 

undo qos policy policy-name 

System view 

2: System level 

policy-name: Policy name, a string of 1 to 31 characters. 

Use the qos policy command to create a policy. This command also leads you to policy view.  

Use the undo qos policy command to remove a policy.  

To remove a policy that has been applied on a port, remove it from the port first.  

Related commands: classifier behavior, qos apply policy. 

# Create the policy user1.  

<Sysname> system-view 

[Sysname] qos policy user1 

[Sysname-qospolicy-user1]