3com S7906E 참조 가이드

 

2-32 

uni-number: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of 

UNIs can be up to 80.  

vlan-id: Multicast VLAN ID, in the range 1 to 4094. &<1-50> means that you can provide up to 50 VLAN 

IDs for this argument. 

all: Specifies all the multicast VLAN IDs.  

Use the uni multicast vlan command to add a UNI to the specified multicast VLAN(s).  

Use the undo uni multicast vlan command to remove a UNI from the specified multicast VLAN(s).  

This command takes effect only when the ONU works in the IGMP snooping mode.  

Related commands: multicast-mode. 

# Add UNI 1 to multicast VLAN 200 and multicast VLAN 3000.  

<Sysname> system-view 

[Sysname] interface onu 3/0/1:1 

[Sysname-Onu3/0/1:1] uni 1 multicast vlan 2000 3000 

uni  uni-number multicast-control multicast-address {  multicast-address  [  to multicast-address ] } 

&<1-10> [ source-ip ip-address [ to ip-address ] ] rule { deny | permit [ channel-limit channel-number ] 

|  preview  time-slice    preview-time [ preview-interval  interval-time  |  preview-times  preview-times 

[ reset-interval reset-interval-time ] ]* } 

undo uni uni-number multicast-control multicast-address [ 

[ 

to 

multicast-address ] ] &<1-10> 

ONU port view 

1: Monitor level 

uni-number: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of 

UNIs can be up to 80.  

multicast-address: Multicast IP address(es). &<1-10> means that you can specify up to 10 multicast IP 

addresses/multicast IP address ranges. 

ip-address: IP address of the multicast source 

deny: Denies access.  

permit: Permits access.  

channel-number: Number of channels that can be accessed at the same time, in the range 1 to 5.