3com S7906E 참조 가이드

 

2-42 

The sum of the minimum uplink bandwidths configured for all the created ONU ports under an OLT port 

cannot exceed 921600 kbps, namely, 900 Mbps. 

 

# Set the ONU port's minimum uplink bandwidth to 9600 kbps and maximum uplink bandwidth to 12800 

kbps.  

<Sysname> system-view 

[Sysname] interface onu 3/0/1:1 

[Sysname-Onu3/0/1:1] upstream-sla minimum-bandwidth 150 maximum-bandwidth 200 

 Info: The minimum-bandwidth of upstream is 9600 Kbps 

 Info: The maximum-bandwidth of upstream is 12800 Kbps 

update onu filename file-url 

undo update onu 

OLT port view, ONU port view 

2: System level 

file-url: Update file name, a string of 1 to 64 characters composed of the device name and the ONU 

update file name. If no device name is specified, it is the name of the Flash of the SRPU. The files in the 

salve SRPU cannot be used for the update.  

Use the update onu filename command to remotely update ONU(s) by using the update file stored on 

the OLT. 

Use the undo update onu command to cancel the remote ONU update configuration. 

 

Executing this command in OLT port view will update all the ONUs corresponding to the created 

ONUs under the OLT port.  

 

Executing this command in ONU port view will update the ONU corresponding to the ONU port. 

Note that this is a configuration command. After it is configured in OLT port view or ONU port view, the 

update command will be executed on the corresponding ONU port: 

 

If the ONU corresponding to the ONU port is online and matches the update file, the ONU is 

updated directly.  

 

If the ONU corresponding to the ONU port is online but does not match the update file, the ONU 

cannot be updated.