3com S7906E 참조 가이드
1-25
Table 1-10 Link speed vs. path cost
Link speed
Duplex state
Path cost in
802.1D-1998
standard
Path cost in
IEEE 802.1t
standard
Path cost in
proprietary
standard
0 —
65535
200,000,000
200,000
10 Mbps
Single Port
Aggregate Link 2 Ports
Aggregate Link 3 Ports
Aggregate Link 4 Ports
100
100
100
100
2,000,000
1,000,000
666,666
500,000
2,000
1,800
1,600
1,400
100 Mbps
Single Port
Aggregate Link 2 Ports
Aggregate Link 3 Ports
Aggregate Link 4 Ports
19
19
19
19
200,000
100,000
66,666
50,000
200
180
160
140
1000 Mbps
Single Port
Aggregate Link 2 Ports
Aggregate Link 3 Ports
Aggregate Link 4 Ports
4
4
4
4
20,000
10,000
6,666
5,000
20
18
16
14
10 Gbps
Single Port
Aggregate Link 2 Ports
Aggregate Link 3 Ports
Aggregate Link 4 Ports
2
2
2
2
2,000
1,000
666
500
2
1
1
1
When calculating path cost for an aggregate port, 802.1D-1998 does not take into account the number
of member ports in its aggregation group as 802.1T does. The calculation formula is: Path Cost =
200,000,000/link speed (in 100 kbps), where link speed is the sum of the link speed values of the
non-blocked ports in the aggregation group.
Examples
# Configure the device to calculate the default path cost for ports based on IEEE 802.1D-1998.
<Sysname> system-view
[Sysname] stp pathcost-standard dot1d-1998
# Configure the device to calculate the default path cost for ports based on IEEE 802.1t.
<Sysname> system-view
[Sysname] stp pathcost-standard dot1t
stp point-to-point
Syntax
stp point-to-point { auto | force-false | force-true }
undo stp point-to-point
View
Ethernet port view, port group view, Layer-2 aggregate port view