3com S7906E 참조 가이드

 

1-7 

[ mirroring-group group-id ] mirroring-port { inbound | outbound | both } 

undo [ mirroring-group group-id ] mirroring-port { inbound | outbound | both } 

Ethernet port view 

2: System level 

group-id: Port mirroring group number, in the range of 1 to 4. 

both: Duplicates both inbound and outbound packets.  

inbound: Duplicates the inbound packets only.  

outbound: Duplicates the outbound packets only.  

Use the mirroring-port command to configure a port as a source mirroring port of a port mirroring 

group.  

Use the undo mirroring-port command to remove a source mirroring port from a port mirroring group.  

Note that: 

z 

If you do not specify the mirroring-group group-id keyword-argument combination, these two 

commands apply to port mirroring group 1. 

z 

The source port cannot be a member port of the current mirroring group. 

z 

A remote destination mirroring group cannot contain source mirroring ports. 

# Configure Ethernet 2/0/1 as a source mirroring port of remote source port mirroring group 2.  

<Sysname> system-view 

[Sysname] mirroring-group 2 remote-source 

[Sysname] interface Ethernet 2/0/1 

[Sysname-Ethernet2/0/1] mirroring-group 2 mirroring-port both 

[ mirroring-group group-id ] monitor-port  

undo [ mirroring-group group-id ] monitor-port  

Ethernet port view