3com S7906E 참조 가이드

 

1-3 

z 

If both the vlan-id and ip-address arguments are specified, the IP address of the VLAN interface 

corresponding to the vlan-id argument must belong to the same network segment as the IP 

address specified by the ip-address argument. 

z 

If no VPN instance is specified in the undo arp command, corresponding ARP entries of all VPN 

instances are removed. 

Related commands: reset arp, display arp. 

# Configure a static ARP entry, with the IP address being 202.38.10.2, the MAC address being 

000f-e201-0000, and the outbound interface being GigabitEthernet2/0/10 of VLAN 10. 

<Sysname> system-view 

[Sysname] arp static 202.38.10.2 000f-e201-0000 10 gigabitethernet 2/0/10 

arp timer aging aging-time 

System view 

2: System level 

aging-time: Aging time for dynamic ARP entries in minutes, in the range 1 to 1,440. 

Use the arp timer aging command to set aging time for dynamic ARP entries. 

Use the undo arp timer aging command to restore the default. 

By default, the aging time for dynamic ARP entries is 20 minutes. 

Related commands: display arp timer aging. 

# Set aging time for dynamic ARP entries to 10 minutes. 

<Sysname> system-view 

[Sysname] arp timer aging 10 

display arp [  [  all | dynamic  |  static ] [ slot  slot-id  ] | vlan vlan-id  |  interface  interface-type 

interface-number ] [ [ verbose ] [ | { begin | exclude | include } regular-expression ] | count ]