3com S7906E 참조 가이드

 

1-18 

# Specify WINS server address 10.12.1.99 in DHCP address pool 0. 

<Sysname> system-view 

[Sysname] dhcp server ip-pool 0 

[Sysname-dhcp-pool-0] nbns-list 10.12.1.99 

netbios-type { b-node | h-node | m-node | p-node } 

DHCP address pool view 

2: System level 

b-node: Broadcast node. A b-node client sends the destination name in a broadcast message. The 

destination returns the name-to-IP mapping to the client after receiving the message. 

p-node: Peer-to-peer node. A p-node client sends the destination name in a unicast message to the 

WINS server, and the WINS server returns the mapping to the client. 

m-node: Mixed node, a combination of a b-node first and p-node second. An m-node client broadcasts 

the destination name, if there is no response, and then unicasts the destination name to the WINS 

server to get the mapping. 

h-node: Hybrid node, a combination of a p-node first and b-node second. An h-node is a b-node with 

the peer-to-peer communication mechanism. An h-node client unicasts the destination name to the 

WINS server, if there is no response, and then broadcasts it to get the mapping from the destination. 

Use the netbios-type command to specify the client NetBIOS node type in a DHCP address pool. 

Use the undo netbios-type command to remove the specified client NetBIOS node type. 

By default, no NetBIOS node type is specified. 

Related commands: dhcp server ip-pool, nbns-list. 

# Specify the NetBIOS node type as b-node in DHCP address pool 0. 

<Sysname> system-view 

[Sysname] dhcp server ip-pool 0 

[Sysname-dhcp-pool-0] netbios-type b-node