3com S7906E 참조 가이드

 

3-1 

 

z 

The DHCP client configuration is supported only on VLAN interfaces. 

z 

When multiple VLAN interfaces having the same MAC address use DHCP for IP address 

acquisition via a relay agent, the DHCP server cannot be the Windows 2000 Server or Windows 

2003 Server. 

z 

You are not recommended to enable both the DHCP client and the DHCP snooping on the same 

switch. Otherwise, DHCP snooping entries may fail to be generated, or the DHCP client may fail to 

obtain an IP address. 

z 

You cannot configure an interface of an aggregation group as a DHCP client. 

 

display dhcp client [ verbose ] [ interface interface-type interface-number ] 

Any view 

1: Monitor level 

verbose: Specifies verbose DHCP client information to be displayed. 

interface  interface-type interface-number: Specifies an interface of which to display DHCP client 

information.  

Use the display dhcp client command to display DHCP client information. If no interface 

interface-type interface-number is specified, DHCP client information of all interfaces will be displayed. 

# Display DHCP client information of all interfaces. 

<Sysname> display dhcp client 

Vlan-interface1 DHCP client information: