3com S7906E 참조 가이드

 

1-3 

  R:Reject   L:Generated by ARP or ESIS 

 

Destination/Mask Nexthop 

  Flag 

 TimeStamp 

 

Interface 

Token 

10.2.1.1/32 

 

127.0.0.1 

 HU   t[1150900568] 

InLoop0   

invalid 

127.0.0.0/8 

 

127.0.0.1 

 U   t[1150623094] 

InLoop0   

invalid 

127.0.0.1/32 

 

127.0.0.1 

 HU   t[1150623094] 

InLoop0   

invalid 

# Display FIB information passing the IP prefix list abc0 

<Sysname> system-view 

[Sysname] ip ip-prefix abc0 permit 10.2.0.0 16 

[Sysname] display fib ip-prefix abc0 

Route Entry matched by prefix-list abc0: 

Summary count: 1 

 

Flag: 

  U:Useable   G:Gateway   H:Host   B:Blackhole   D:Dynamic   S:Static 

  R:Reject   L:Generated by ARP or ESIS 

 

Destination/Mask Nexthop 

  Flag 

 TimeStamp 

 

Interface 

Token 

10.2.0.0/16 

 

0.0.0.0   

 U   t[1150900568] 

Vlan1 

 

invalid 

display fib ip-address1 [ { mask1 | mask-length1 } [ ip-address2 { mask2 | mask-length2 } | longer ] | 

longer ] 

Any view 

1: Monitor level 

ip-address1, ip-address2: Destination IP address, in dotted decimal notation. ip-address1 and 

ip-address2 together determine an address range for the FIB entries to be displayed. 

mask1, mask2: IP address mask. 

mask-length1, mask-length2: Length of IP address mask. 

longer: Displays FIB entries that match the specified address/mask and have masks longer than or 

equal to the mask that a user enters. If no masks are specified, FIB entries that match the natural 

network address and have the masks longer than or equal to the natural mask will be displayed. 

Use the display fib ip-address command to display FIB entries that match the specified destination IP 

address.