3com S7906E 참조 가이드

 

1-10 

State 

State of a neighbor, including: 

z 

INCMP: The address is being resolved. The link layer address of the 
neighbor is unknown. 

z 

REACH: The neighbor is reachable. 

z 

STALE: The reachability of the neighbor is unknown. The device will 
not verify the reachability any longer unless data is sent to the 
neighbor. 

z 

DELAY: The reachability of the neighbor is unknown. The device 
sends an NS message after a delay. 

z 

PROBE: The reachability of the neighbor is unknown. The device 
sends an NS message to verify the reachability of the neighbor. 

T 

Type of neighbor information, including static configuration and dynamic 
acquisition. 

Age 

For a static entry, a hyphen “-“ is displayed. For a dynamic entry, the 
reachable time (in seconds) elapsed is displayed, and if it is never 
reachable, “#” is displayed (for a neighbor acquired dynamically). 

 

display ipv6 neighbors  {  {  all | dynamic | static } [ slot  slot-number ] | interface interface-type 

interface-number | vlan vlan-id } count 

Any view 

1: Monitor level 

all: Displays the total number of all neighbor entries, including neighbor entries acquired dynamically 

and configured statically. 

dynamic: Displays the total number of all neighbor entries acquired dynamically. 

static: Displays the total number of neighbor entries configured statically. 

slot slot-number: Displays the total number of neighbor entries of a specified slot. 

interface interface-type interface-number: Displays the total number of neighbor entries of a specified 

interface. 

vlan vlan-id: Displays the total number of neighbor entries of a specified VLAN whose ID ranges from 1 

to 4094. 

Use the display ipv6 neighbors count command to display the total number of neighbor entries 

satisfying the specified condition. 

# Display the total number of neighbor entries acquired dynamically.