3com S7906E 참조 가이드
1-1
1
IP Routing Table Commands
z
The term “router” in this document refers to a router in a generic sense or a Layer 3 switch.
z
EA boards (such as LSQ1GP12EA and LSQ1TGX1EA) do not support IPv6 features.
IP Routing Table Commands
display ip routing-table
Syntax
display ip routing-table [ vpn-instance vpn-instance-name ] [ verbose | | { begin | exclude | include }
regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Displays routing table information for a VPN instance. The
vpn-instance-name argument represents the instance name and is a string of 1 to 31 case-sensitive
characters.
verbose: Displays detailed routing table information, including that for inactive routes. With this
keyword absent, the command displays only brief information about active routes.
|: Uses a regular expression to filter output information. For details about regular expressions, refer to
the section CLI Display in Basic System Configuration in the System Volume.
begin: Displays route entries starting from the one specified by the regular expression.
exclude: Displays route entries not matching the regular expression.
include: Displays route entries matching the regular expression.
regular-expression: Regular expression, a string of 1 to 256 case-sensitive characters used for
specifying routing entries.
Description
Use the display ip routing-table command to display brief information about active routes in the
routing table.