3com S7906E 참조 가이드

 

1-3 

Use the default-route originate cost command to configure all the interfaces under the RIP process to 

advertise a default route with the specified metric to RIP neighbors. 

Use the undo default-route originate command to disable all the interfaces under the RIP process 

from sending a default route.  

By default, no default route is sent to RIP neighbors. 

The RIP router with this feature configured will not receive any default routes from RIP neighbors. 

Related commands: rip default-route. 

# Configure all the interfaces under RIP process 1 to send only a default route with a metric of 2 to RIP 

neighbors. 

<Sysname> system-view 

[Sysname] rip 100 

[Sysname-rip-100] default-route only cost 2 

display rip [ process-id | vpn-instance vpn-instance-name ] 

Any view 

1: Monitor level 

process-id: RIP process ID, in the range of 1 to 65535.  

vpn-instance vpn-instance-name: Specifies a VPN instance name, a string of 1 to 31 characters. 

Use the display rip command to display the current status and configuration information of the 

specified RIP process. 

z 

If process-id is not specified, information about all configured RIP processes is displayed. 

z 

If vpn-instance-name is specified, the RIP configuration of the specified VPN instance is displayed. 

# Display the current status and configuration information of all configured RIP processes. 

<Sysname> display rip  

  Public VPN-instance name : 

 

    RIP process : 1 

       RIP version : 1 

       Preference : 100