3com S7906E 참조 가이드

 

1-8 

2: System level 

description: Configures a description for the OSPF process in OSPF view, or for the OSPF area in 

OSPF area view. description is a string of up to 80 characters. 

Use the description command to configure a description for an OSPF process or area. 

Use the undo description command to remove the description. 

No description is configured by default. 

Use of this command is only for the identification of an OSPF process or area. The description has no 

special meaning. 

# Describe the OSPF process 100 as abc. 

<Sysname> system-view 

[Sysname] ospf 100 

[Sysname-ospf-100] description abc 

# Describe the OSPF area0 as bone area. 

<Sysname> system-view 

[Sysname] ospf 100 

[Sysname-ospf-100] area 0 

[Sysname-ospf-100-area-0.0.0.0] description bone area 

display ospf [ process-id ] abr-asbr 

Any view 

1: Monitor level 

process-id: OSPF process ID, in the range 1 to 65535. Use this argument to display information about 

the routes to the ABR/ASBR under the specified OSPF process. 

Use the display ospf abr-asbr command to display information about the routes to OSPF ABR/ASBR.  

If you use this command on routers in a stub area, no ASBR information is displayed.