3com S7906E 참조 가이드

 

1-25 

Use the display ospf peer statistics command to display OSPF neighbor statistics. 

If no OSPF process is specified, OSPF neighbor statistics of all OSPF processes is displayed. 

# Display OSPF neighbor statistics. 

<Sysname> display ospf peer statistics 

          OSPF Process 1 with Router ID 10.3.1.1 

                    Neighbor Statistics 

  Area ID         Down Attempt Init 2-Way ExStart Exchange Loading Full Total 

  0.0.0.0         0    0       0    0     0       0        0       1    1 

  0.0.0.2         0    0       0    0     0       0        0       1    1 

  Total           0    0       0    0     0       0        0       2    2 

Table 1-12 display ospf peer statistics command output description 

Area ID 

Area ID. The state statistics information of all the routers in the area to which 
the router belongs is displayed.  

Down 

Number of neighboring routers in the Down state in the same area 

Attempt 

Number of neighboring routers in the Attempt state in the same area 

Init 

Number of neighboring routers in the Init state in the same area 

2-Way 

Number of neighboring routers in the 2-Way state in the same area 

ExStart 

Number of neighboring routers in the ExStart state in the same area 

Exchange 

Number of neighboring routers in the Exchange state in the same area 

Loading 

Number of neighboring routers in the Loading state in the same area 

Full 

Number of neighboring routers in the Full state in the same area 

Total 

Total number of neighbors under the same state, namely, Down, Attempt, Init, 
2-Way, ExStart, Loading, or Full.  

 

display ospf [ process-id ] request-queue [ interface-type interface-number ] [ neighbor-id ] 

Any view 

1: Monitor level 

process-id: OSPF process ID, in the range 1 to 65535. 

interface-type interface-number: Interface type and number.