3com S7906E 참조 가이드
1-34
Description
Use the import-route isis level-2 into level-1 command to enable route leaking from Level-2 to
Level-1.
Use the undo import-route isis level-2 into level-1 command to disable routing leaking.
No route leaking is configured by default.
Note that:
z
You can specify a routing policy in the import-route isis level-2 into level-1 command to filter
routes from Level-2 to Level-1. Other routing policies specified for route reception and
redistribution does not affect the route leaking.
z
If a filter policy is configured, only routes passing it can be advertised into the Level-1 area.
Related commands: import-route.
Examples
# Enable route leaking from Level-2 to Level-1.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1] import-route isis level-2 into level-1
import-route limit (IS-IS view)
Syntax
import-route limit number
undo import-route limit
View
IS-IS view
Default Level
2: System level
Parameters
number: Maximum number of redistributed Level 1/Level 2 IPv4 routes, in the range 1 to 128000.
Description
Use the import-route limit command to configure the maximum number of redistributed Level 1/Level
2 IPv4 routes.
Use the undo import-route limit command to restore the default.
By default, the maximum number of redistributed Level 1/Level 2 IPv4 routes is 128000.
Examples
# Configure IS-IS process 1 to redistribute up to 1000 Level 1/Level 2 IPv4 routes.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] import-route limit 1000