3com S7906E 참조 가이드

 

1-48 

seconds: Specifies the interval in seconds for retransmitting LSP packets, ranging from 1 to 300.  

Use the isis timer retransmit command to configure the interval for retransmitting LSP packets over a 

point-to-point link.  

Use the undo isis timer retransmit command to restore the default.  

By default, the retransmission interval is 5 seconds. 

A P2P link requires a response to a sent LSP. If no response is received within the retransmission 

interval, the LSP is retransmitted.  

You need not use this command over a broadcast link where CNSPs are broadcast periodically.  

Related commands: isis timer lsp. 

 

z 

This command is not available in loopback interface view.  

z 

Configure a proper retransmission interval to avoid unnecessary retransmissions.  

 

# Configure the LSP retransmission interval as 10 seconds for VLAN-interface 10.  

<Sysname> system-view 

[Sysname] interface vlan-interface 10 

[Sysname-Vlan-interface10] isis timer retransmit 10 

is-level { level-1 | level-1-2 | level-2 } 

undo is-level 

IS-IS view 

2: System level 

level-1: Configures the router to work on Level-1, which means it only calculates routes within the area, 

and maintains the L1 LSDB. 

level-1-2: Configures the router to work on Level-1-2, which means it calculates routes and maintains 

the LSDBs for both L1 and L2.