3com S7906E 참조 가이드

 

1-26 

None 

Use the display bgp routing-table different-origin-as command to display BGP routes originating 

from different autonomous systems. 

# Display BGP routes originating from different ASs. 

<Sysname> display bgp routing-table different-origin-as 

 BGP Local router ID is 2.2.2.2 

 Status codes: * - valid, > - best, d - damped, 

               h - history,  i - internal, s - suppressed, S - Stale 

               Origin : i - IGP, e - EGP, ? - incomplete 

     Network           NextHop         MED        LocPrf     PrefVal Path/Ogn 

 

 *>  55.0.0.0         12.1.1.1       0                    0       100? 

 *                    14.1.1.2       0                    0       300? 

Refer to 

 for description on the fields above.  

display bgp routing-table flap-info [ regular-expression  as-regular-expression | as-path-acl 

as-path-acl-number | ip-address [ { mask | mask-length } [ longer-match ] ] ] 

Any view  

1: Monitor level 

as-regular-expression: Displays route flap information that matches the AS path regular expression, 

which is a string of 1 to 80 characters. 

as-path-acl-number: Displays route flap information matching the AS path ACL. The number is in the 

range 1 to 256. 

ip-address: Destination IP address. 

mask: Mask, in dotted decimal notation. 

mask-length: Mask length, in the range 0 to 32.  

longer-match: Matches the longest prefix.  

Use the display bgp routing-table flap-info command to display BGP route flap statistics.