3com S7906E 참조 가이드

 

1-44 

ip-address: IP address of a peer.  

Use the peer capability-advertise conventional command to disable BGP multi-protocol extension 

and route refresh for a peer/peer group. 

Use the undo peer capability-advertise command to enable BGP multi-protocol extension and route 

refresh for a peer/peer group.  

By default, BGP multi-protocol extension and route refresh are enabled. 

# In BGP view, disable multi-protocol extension and route refresh for peer 160.89.2.33.  

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] peer 160.89.2.33 as-number 100 

[Sysname-bgp] peer 160.89.2.33 capability-advertise conventional 

peer { group-name | ip-address } capability-advertise route-refresh 

undo peer { group-name | ip-address } capability-advertise route-refresh 

BGP view/BGP-VPN instance view 

2: System level 

group-name: Name of a peer group, a string of 1 to 47 characters.  

ip-address: IP address of a peer.  

Use the peer capability-advertise route-refresh command to enable the BGP route refresh capability. 

Use the undo peer capability-advertise route-refresh command to disable the capability.  

The capability is enabled by default. 

# In BGP view, enable BGP route refresh for peer 160.89.2.33.  

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] peer 160.89.2.33 as-number 100 

[Sysname-bgp] peer 160.89.2.33 capability-advertise route-refresh 

# In BGP-VPN instance view, enable BGP route refresh for peer 160.89.2.33 (The VPN has been 

created).