3com S7906E 참조 가이드

 

1-54 

[Sysname] bgp 100 

[Sysname-bgp] peer 131.100.1.1 as-number 200 

[Sysname-bgp] peer 131.100.1.1 keep-all-routes 

# In BGP-VPN instance view, save routing information from peer 131.100.1.1(the VPN has been 

created). 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] ipv4-family vpn-instance vpn1 

[Sysname-bgp-vpn1] peer 131.100.1.1 as-number 200 

[Sysname-bgp-vpn1] peer 131.100.1.1 keep-all-routes 

peer { group-name | ip-address } log-change 

undo peer { group-name | ip-address } log-change 

BGP view/BGP-VPN instance view 

2: System level 

group-name: Name of a peer group, a string of 1 to 47 characters.  

ip-address: IP address of a peer. 

Use the peer log-change command to enable the logging of session state and event information for a 

specified peer or peer group.  

Use the undo peer log-change command to remove the configuration.  

The logging is enabled by default.  

# In BGP view, enable the logging of session state and event information for peer group test.  

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] peer test log-change 

# In BGP-VPN instance view, enable the logging of session state and event information for peer group 

test (the VPN has been created). 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] ipv4-family vpn-instance vpn1 

[Sysname-bgp-vpn1] peer test log-change