3com S7906E 참조 가이드

 

1-4 

If multiple OSPFv3 processes are available, use of this command takes effect for the current process 

only.  

# Specify the default cost for redistributed routes as 10. 

<Sysname> system-view 

[Sysname] ospfv3 1 

[Sysname-ospfv3-1] default cost 10 

default-cost value 

OSPFv3 area view 

2: System level 

value: Specifies a cost for the default route advertised to the stub area, in the range of 0 to 65535. The 

default is 1. 

Use the default-cost command to specify the cost of the default route to be advertised to the stub area.  

Use the undo-default-cost command to restore the default value.  

Use of this command is only available on the ABR that is connected to a stub area.  

You have two commands to configure a stub area: stub, defaulted-cost. You need to use the stub 

command on routers connected to a stub area to configure the area as stub.   

If multiple OSPFv3 processes are running, use of this command takes effect only for the current 

process.  

Related commands: stub.  

# Configure Area1 as a stub area, and specify the cost of the default route advertised to the stub area as 

60. 

<Sysname> system-view 

[Sysname] ospfv3 

[Sysname-ospfv3-1] area 1 

[Sysname-ospfv3-1-area-0.0.0.1] stub 

[Sysname-ospfv3-1-area-0.0.0.1] default-cost 60