3com S7906E 빠른 설정 가이드

 

6-7 

Since it takes a long time to download the host software package through the console port using 

XMODEM, you may use other alternatives if available. 

 

Follow these steps to download the host software package onto the switch: 

1)  Enter the Boot Menu (refer to section “

” on page 

), and enter 1 when the system 

displays “Enter your choice(0-5):” to enter the download protocol menu. 

        BOOT  MENU 

1. Download application file to device 

2. Select application file to boot 

3. Display all files in device 

4. Delete file from device 

5. Modify bootrom password 

0. Reboot 

Enter your choice(0-5): 1 

2)  On the download protocol menu, type 3 to select XMODEM and press Enter, and then the system 

will prompt you to input the name of the file to be downloaded. 

1. Set TFTP protocol parameter 

2. Set FTP protocol parameter 

3. Set XMODEM protocol parameter 

0. Return to boot menu 

Enter your choice(0-4): 3 

Load File name           :update.app 

3)  Enter the file name to enter the download baud rate menu: 

Please select your download baudrate:  

1. 9600 

2. 19200 

3. 38400 

4. 57600 

5. 115200 

0. Exit  

Enter your choice (0-5):2 

4)  Choose an appropriate download baud rate. If you select 2 to choose the download baud rate 

19,200 bps, the system displays the following information after you press Enter: 

Please change the terminal's baudrate to 19200 bps and select XMODEM protocol. 

Press ENTER key when ready.