3com S7906E 빠른 설정 가이드
1-38
Table 1-64 Description of the fan status LEDs
LED
Description
OK
z
ON: The fans operate normally.
z
OFF: The fans are faulty or out of position.
FAIL
z
ON: The fans are faulty or out of position.
z
OFF: The fans operate normally.
z
LPU status LEDs (SLOT0 through SLOT11)
SLOT0 through SLOT11: The LEDs indicate the status of the LPUs seated in the twelve slots.
Table 1-65 Description of the LPU status LEDs
LED
Description
RUN
z
ON/OFF: The LPU is faulty or out of position.
z
Blinking: The LPU is operating normally.
ALM
z
OFF: The LPU is operational or out of position.
z
ON: The LPU is faulty.
If the RUN LED flashes at a high frequency, the card is in the startup process, but is not yet operational.
At system startup, the ALM LED will be ON for a while, but it does not mean that the card is faulty.
z
ACTIVE LED
The ACTIVE LED shows the active/standby status of the LSQ1SRPD0. If the ACTIVE LED is ON, the
LSQ1SRPD0 is active; if OFF, the LSQ1SRPD0 is standby.
RESET button
A reset button is provided on the LSQ1SRPD0 for you to reset the card when necessary.
Salience VI-GE SRPU-LSQ1SRP12GB0
Applicable models
z
S7903E
z
S7906E
z
S7910E
z
S7906E-V
Technial specifications
Table 1-66 Technical specifications of the LSQ1SR12GB0
Item
Specifications
CPU
Dual CPUs:
z
MIPS64, 600 MHz
z
MIPS64, 400 MHz