3com MSR 20-20 참조 매뉴얼

C

HAPTER

 72: BGP C

ONFIGURATION

 C

OMMANDS

as-path-acl-number: Clears the flap statistics of routes matching an AS path ACL, 
number of which is in the range 1 to 256.

ip-address: Clears the flap statistics of a route.

mask: Network mask, in dotted decimal notation.

mask-length: Mask length, in the range 0 to 32.

Use the reset bgp flap-info command to clear the flap statistics of routes 
matching the specified filter.

The flap statistics of all the routes will be cleared if no parameter is specified.

# Clear the flap statistics of all routes matching AS path ACL 10.

<Sysname> reset bgp flap-info as-path-acl 10 

User view

None

Use the reset bgp ipv4 all command to reset all the BGP connections of IPv4 
unicast address family.

# Reset all the BGP connections of IPv4 unicast address family.

<Sysname> reset bgp ipv4 all 

router-id router-id

BGP view

router-id: Router ID in IP address format.

Use the router-id command to specify a router ID.

Use the undo router-id command to remove a router ID.

To run BGP protocol, a router must have a router ID, which is an unsigned 32-bit 
integer, the unique ID of the router in the AS.