3com MSR 20-20 참조 매뉴얼

debugging bgp [ ipv4-address | ipv6-address ] { keepalive | open | packet | 
raw-packet | route-refresh } [ receive | send ] [ verbose ] }

undo debugging bgp [ ipv4-address | ipv6-address ] { keepalive | open | packet | 
raw-packet | route-refresh } [ receive | send ] [ verbose ] }

User view

1: Monitor level

ipv4-address: IPv4 address of a peer.

ipv6-address: IPv6 address of a peer.

keepalive: Enables BGP Keepalive message debugging.

open: Enables BGP OPEN message debugging.

packet: Specifies to enable BGP packet debugging

raw-packet: Enables BGP raw packet debugging.

route-refresh: Enables BGP Route-Refresh message debugging.

receive: Enables the debugging for received BGP packets.

send: Enables the debugging for sent BGP packets.

verbose: Displays detailed debugging information.

Use the debugging bgp command to enable debugging for specific BGP 
message types.

Use the undo debugging bgp command to disable debugging for specific BGP 
message types.

Enabling debugging may affect system performance; therefore, use the command 
only when necessary and disable debugging once the debugging operation is 
complete.

By default, this debugging is disabled.

Table 226   Description on the fields of the debugging bgp command

Recv Received 

packets 

Send Sent 

packets 

Length: LengthNumber Packet 

length