3com MSR 20-20 참조 매뉴얼

MED

: 0

Origin

: Incomplete

AS Path

:

Next Hop

: 100::2

22::22/128,

*Sep

4 16:17:20:708 2006 Sysname RM/6/RMDEBUG:

BGP_IPV6.: Recv UPDATE from peer 100::2 with following destinations :

Update message length : 78

Local Pref

: 100

MED

: 0

Origin

: Incomplete

AS Path

:

Next Hop

: 100::2

100::/64, 

debugging bgp update l2vpn [ peer { ipv4-address | group-name } ] [ receive | send ] 
[ verbose ]

undo debugging bgp update l2vpn [ peer { ipv4-address | group-name } ] [ receive | 
send ] [ verbose ]

User view

1: Monitor level

peer { ipv4-address | group-name }: Enables/disables BGP L2VPN Update message 
debugging for the specified peer/peer group.

receive: Enables/disables the debugging for received BGP packets.

send: Enables/disables the debugging for sent BGP packets.

verbose: Displays detailed debugging information.

Use the debugging bgp update l2vpn command to enable debugging for BGP 
L2VPN Update messages.

Use the undo debugging bgp update l2vpn command to disable debugging 
for BGP L2VPN Update messages.

By default, this debugging is disabled.

Enabling debugging may affect system performance; therefore, use this command 
only when necessary and disable debugging once the debugging operation is 
complete.