3com MSR 20-20 참조 매뉴얼
1032
C
HAPTER
73: BGP D
EBUGGING
C
OMMANDS
Local Pref
: 100
MED
: 0
Origin
: Incomplete
AS Path
:
Next Hop
: 100::2
22::22/128(1027)
// Update message information of IPv6 labeled routes
debugging bgp update peer
Syntax
debugging bgp update peer { ipv4-address | group-name } [ acl acl-number |
ip-prefix ip-prefix-name ] [ receive | send ] [ verbose ]
ip-prefix ip-prefix-name ] [ receive | send ] [ verbose ]
undo debugging bgp update peer { ipv4-address | group-name } [ receive | send ] [
verbose ]
verbose ]
View
User view
Default Level
1: Monitor level
Parameters
ipv4-address: IPv4 peer address.
group-name: Peer group name.
acl acl-number: Filters the output message debugging information with the
specified ACL.
specified ACL.
ip-prefix ip-prefix-name: Filters the output message debugging information with
the specified IP prefix list.
the specified IP prefix list.
receive: Enables/disables the debugging for the received BGP packets.
send: Enables/disables the debugging for the sent BGP packets.
verbose: Displays detailed debugging information.
Description
Use the debugging bgp update peer command to enable BGP update
message debugging for the specified peer/peer group.
message debugging for the specified peer/peer group.
Use the undo debugging bgp update peer command to disable BGP Update
message debugging for the specified peer/peer group.
message debugging for the specified peer/peer group.
By default, this debugging is disabled.
Enabling debugging may affect system performance; therefore, use this command
only when necessary and disable debugging once the debugging operation is
complete.
only when necessary and disable debugging once the debugging operation is
complete.
Examples
For Update message debugging information in different networking
environments, see the related commands.
environments, see the related commands.