3com MSR 20-20 참조 매뉴얼
1117
display ospf cumulative
Syntax
display ospf [ process-id ] cumulative
View
Any view
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
Description
Use the display ospf cumulative command to display OSPF statistics.
Use of this command is helpful for troubleshooting.
Examples
# Display OSPF statistics.
<Sysname> display ospf cumulative
OSPF Process 1 with Router ID 2.2.2.2
Cumulations
IO Statistics
Type
Input
Output
Hello
61
122
DB Description
2
3
Link-State Req
1
1
Link-State Update
3
3
Link-State Ack
3
2
LSAs originated by this router
Router: 4
Network: 0
Sum-Net: 0
Area
Area ID in the IP address format
Authtype
Authentication type of the area: Non-authentication,
simple authentication, or MD5 authentication
simple authentication, or MD5 authentication
Area flag
The type of the area
SPF scheduled Count
SPF calculation count in the OSPF area
Interface
IP address of the interface
Cost Interface
cost
State Interface
state
Type Interface
network
type
MTU Interface
MTU
Priority Router
priority
Designated Router
The Designated Router
Backup Designated Router
The Backup Designated Router
Timers
Intervals of timers: hello, dead, poll, retransmit, and
transmit delay
transmit delay
Transmit Delay
LSA transmit delay on the interface
Table 264 Description on the fields of the display ospf brief command
Field Description