3com MSR 20-20 참조 매뉴얼
1120
C
HAPTER
76: OSPF C
ONFIGURATION
C
OMMANDS
display ospf interface
Syntax
display ospf [ process-id ] interface [ all | interface-type interface-number ]
View
Any view
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
all: Display OSPF information of all interfaces.
interface-type interface-number: Interface type and interface number.
Description
Use the display ospf interface command to display OSPF interface information.
If no OSPF process is specified, OSPF interface information of all OSPF processes is
displayed.
displayed.
Examples
# Display OSPF interface information.
<Sysname> display ospf interface
OSPF Process 1 with Router ID 192.168.1.1
Interfaces
Area: 0.0.0.0
IP Address
Type
State
Cost
Pri
DR
BDR
192.168.1.1
PTP
P-2-P
1562
1
0.0.0.0
0.0.0.0
Area: 0.0.0.1
IP Address
Type
State
Cost
Pri
DR
BDR
172.16.0.1
Broadcast
DR
1
1
172.16.0.1
0.0.0.0
LS ACK: Unknown LSA type
LSAck packets with unknown LSA type
LS REQ: Empty request
LSR packets with no request information
LS REQ: Bad request
Bad LSR packets
LS UPD: LSA checksum bad
LSU packets with wrong LSA checksum
LS UPD: Received less recent LSA
LSU packets without latest LSA
LS UPD: Unknown LSA type
LSU packets with unknown LSA type
Table 266 Description on the fields of the display ospf error command
Field Description
Table 267 Description on the fields of the display ospf interface command
Field Description
Area
Area ID of the interface
IP address
Interface IP address (regardless of whether TE is enabled or not)
Type
Interface network type: PTP, PTMP, Broadcast, or NBMA
State
Interface state defined by interface state machine: DOWN, Waiting, p-2-p,
DR, BDR, or DROther
DR, BDR, or DROther
Cost Interface
cost
Pri Router
priority