3com MSR 20-20 참조 매뉴얼
1125
# Display brief OSPF neighbor information.
<Sysname> display ospf peer
OSPF Process 1 with Router ID 1.1.1.1
Neighbor Brief Information
Area: 0.0.0.0
Router ID
Address
Pri Dead-Time Interface
State
1.1.1.2
1.1.1.2
1
40
Eth0/1/0
Full/DR
display ospf peer statistics
Syntax
display ospf [ process-id ] peer statistics
View
Any view
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
Description
Use the display ospf peer statistics command to display OSPF neighbor
statistics.
statistics.
State
Neighbor state: Down, Init, Attempt, 2-Way, Exstart, Exchange,
Loading or Full
Loading or Full
Mode
Neighbor mode for DD exchange: Master or Slave
Priority Router
priority
DR
The DR on the interface’s network segment
BDR
The BDR on the interface’s network segment
MTU Interface
MTU
Dead timer due in 33 sec Dead timer times out in 33 seconds
Neighbor is up for
93:12:38
93:12:38
The neighbor has been up for 93:12:38
Authentication Sequence Authentication sequence number
Neighbor state change
count
count
Counts of neighbor state changes
Table 272 Description on the fields of the display ospf peer command
Field Description
Area Area
of
neighbors
Router ID
Neighbor router ID
Address
Neighbor interface address
Pri Router
priority
Dead time
Dead interval remained
Interface
The Interface connected to neighbors
State
Neighbor state: Down, Init, Attempt, 2-Way, Exstart,
Exchange, Loading or Full
Exchange, Loading or Full
Table 271 Description on the fields of the display ospf peer verbose command
Field Description