3com MSR 20-20 참조 매뉴얼
1171
<Sysname> system-view
[Sysname] rip 1
[Sysname-rip-1] import-route static cost 4
# Set the default cost for redistributed routes to 3.
[Sysname-rip-1] default cost 3
# Redistribute OSPF routes with the cost being the default cost.
[Sysname-rip-1] import-route ospf
maximum load-balancing (RIP view)
Syntax
maximum load-balancing number
undo maximum load-balancing
View
RIP view
Parameters
number: Maximum number of load balanced routes, in the range 1 to 8.
Description
Use the maximum load-balancing command to specify the maximum number
of load balanced routes.
of load balanced routes.
Use the undo maximum load-balancing command to restore the default.
Examples
# Specify the maximum number of load balanced routes as 2.
<Sysname> system-view
[Sysname] rip
[Sysname-rip-1] maximum load-balancing 2
network
Syntax
network network-address
undo network network-address
View
RIP view
Parameters
network-address: IP address of a network segment, which can be the IP network
address of any interface.
address of any interface.
Description
Use the network command to enable RIP on the interface attached to the
specified network.
specified network.
Use the undo network command to disable RIP on the interface attached to the
specified network.
specified network.