3com MSR 20-20 참조 매뉴얼

# Configure an additional metric of 12 for RIP routes sent on Ethernet1/0.

<Sysname> system-view

[Sysname] interface ethernet1/0

[Sysname-Ethernet1/0] rip metricout 12 

rip mib-binding process-id

System view

process-id: RIP process number, in the range of 1 to 65535.

Use the rip mib-binding command to bind MIB operations with a specified RIP 
process.

Use the undo rip mib-binding command to restore the default.

By default, MIB operations are bound to the RIP process with the smallest process 
ID.

# Configure RIP 100 to accept SNMP requests.

<Sysname> system-view

[Sysname] rip mib-binding 100 

# Restore the default.

[Sysname] undo rip mib-binding 

Interface view

None

Use the rip output command to enable the interface to send RIP messages.

Use the undo rip output command to disable the interface from sending RIP 
messages.

Sending RIP messages is enabled on an interface by default.