3com MSR 20-20 참조 매뉴얼

<Sysname> system-view

[Sysname] route-policy policy1 permit node 10

[Sysname-route-policy] if-match as-path 1

[Sysname-route-policy] apply mpls-label 

apply origin { igp | egp as-number | incomplete }

Routing policy view

igp: Sets the origin of BGP routing information to IGP.

egp: Sets the origin of BGP routing information to EGP.

as-number: Autonomous system number for EGP routes, in the range of 1 to 
65535.

incomplete: Sets the origin of BGP routing information to unknown.

Use the apply origin command to apply the specified origin attribute to BGP 
routes.

Use the undo apply origin command to remove the clause configuration.

No origin attribute is set for routing information by default.

if-match interface, if-match acl, if-match ip-prefix, if-match ip next-hop, 
if-match cost, if-match tag, route-policy, apply ip-address next-hop, apply 
local-preference, apply cost and apply tag.

# Create routing policy policy1 with node 10, matching mode as permit. If a route 
matches AS-path-ACL 1, set the origin for the route to IGP.

<Sysname> system-view

[Sysname] route-policy policy1 permit node 10

[Sysname-route-policy] if-match as-path 1

[Sysname-route-policy] apply origin igp 

apply preference preference

Routing policy view

preference: Routing preference, in the range of 1 to 255.