3com MSR 20-20 참조 매뉴얼

C

HAPTER

 80: IP

V

6 R

OUTING

 P

OLICY

 C

ONFIGURATION

 C

OMMANDS

# Display the statistics of all the IPv6 prefix lists.

<Sysname> display ip ipv6-prefix

Prefix-list6 abc

Permitted 0

Denied 0

index:

10

permit

::/0

index:

20

permit

::/1

ge

1

le

128 

if-match ipv6 { address | next-hop | route-source } { acl acl6-number | prefix-list 
ipv6-prefix-name }

undo if-match ipv6 { address | next-hop | route-source } [ acl | prefix-list ]

Routing policy view

address: Matches the destination address of IPv6 routing information.

next-hop: Matches the next hop of IPv6 routing information.

route-source: Matches the source address of IPv6 routing information.

acl acl6-number: Specifies the number of an IPv6 ACL for filtering, in the range 
2000 to 3999 for address, and 2000 to 2999 for next-hop and route-source.

prefix-list ipv6-prefix-name: Specifies the name of a IPv6 prefix list for filtering, a 
string of 1 to 19 characters.

Use the if-match ipv6 command to configure a destination, next hop or source 
address based match criterion for IPv6 routes.

Use the undo if-match ipv6 command to remove the match criterion.

The match criterion is not configured by default.

# Create a routing policy named policy1 with node 10, matching mode as permit. 
Define an if-match clause to permit the routing information whose next hop 
address matches IPv6 prefix list p1.

Table 286   Description on the fields of the display ip ipv6-prefix command

Prefix-list6 Name 

of 

the IPv6 prefix list 

Permitted 

Number of routes satisfying the match criterion 

Denied 

Number of routes not satisfying the match criterion 

Index 

Internal serial number of address prefix list 

Permit 

Matching mode: permit, deny 

::/1 

IPv6 address and its prefix length for matching 

ge 

greater-equal, the lower limit prefix length 

Le 

less-equal, the upper limit prefix length