3com MSR 20-20 참조 매뉴얼
82
IP
V
6 BGP C
ONFIGURATION
C
OMMANDS
balance (IPv6 address family view)
Syntax
balance number
undo balance
View
IPv6 address family view
Parameters
number: Number of BGP routes participating in load balancing, in the range 1 to
8. When it is set to 1, no load balancing is available.
8. When it is set to 1, no load balancing is available.
Description
Use the balance command to configure the number of routes participating in
IPv6 BGP load balancing.
IPv6 BGP load balancing.
Use the undo balance command to restore the default.
The feature is not available by default.
Unlike IGP, BGP has no explicit metric for making load balancing decision. Instead,
it implements load balancing by defining its routing rule.
it implements load balancing by defining its routing rule.
Related commands:
Examples
# Set the number of routes participating in IPv6 BGP load balancing to 2.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] balance 2
bestroute as-path-neglect (IPv6 address family view)
Syntax
bestroute as-path-neglect
undo bestroute as-path-neglect
View
IPv6 address family view
Parameters
None