3com MSR 20-20 참조 매뉴얼

C

HAPTER

 82: IP

V

6 BGP C

ONFIGURATION

 C

OMMANDS

value. In the case that all other conditions are the same, the system first selects the 
route with the smaller MED value as the best route for the autonomous system.

# Devices A and B belong to AS100 and device C belongs to AS200. C is the peer 
of A and B. Configure the MED of A as 25 to make C select the path from B.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv6-family

[Sysname-bgp-af-ipv6] default med 25 

IPv6 address family view

None

Use the default-route imported command to enable the redistribution of 
default route into the IPv6 BGP routing table.

Use the undo default-route imported command to disable the redistribution.

By default, the redistribution is not enabled.

# Enable the redistribution of default route from OSPFv3 into IPv6 BGP.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv6-family

[Sysname-bgp-af-ipv6] default-route imported

[Sysname-bgp-af-ipv6] import-route ospfv3 1 

display bgp ipv6 group [ ipv6-group-name ]

Any view

ipv6-group-name: Peer group name, a string of 1 to 47 characters.

Use the display bgp ipv6 group command to display IPv6 peer group 
information.

If no ipv6-group-name is specified, information about all peer groups is displayed.