3com MSR 20-20 참조 매뉴얼
1231
display bgp ipv6 routing-table as-path-acl
Syntax
display bgp ipv6 routing-table as-path-acl as-path-acl-number
View
Any view
Parameters
as-path-acl-number: Number of an AS path ACL permitted by which to display
routing information, ranging from 1 to 256.
routing information, ranging from 1 to 256.
Description
Use the display bgp ipv6 routing-table as-path-acl command to display
routes filtered through the specified AS path ACL.
routes filtered through the specified AS path ACL.
Status codes
Status codes:
* - valid
> - best
d - damped
h - history
i - internal (IGP)
s - summary suppressed (suppressed)
S - Stale
Origin
i - IGP (originated in the AS)
e - EGP (learned through EGP)
? - incomplete (learned by other means)
Network Destination
network
address
PrefixLen Prefix
length
NextHop Next
Hop
MED MULTI_EXIT_DISC
attribute
LocPrf
Local preference value
Path
AS_PATH attribute, recording the ASs the packet has passed to avoid
routing loops
routing loops
PrefVal Preferred
value
Label Label
Ogn
Origin attribute of the route, which can take on one of the following
values:
values:
i
Indicates that a route is interior to the AS.
Summary routes and the routes configured using the
network command are considered IGP routes.
network command are considered IGP routes.
e
Indicates that a route is learned from the exterior
gateway protocol (EGP).
gateway protocol (EGP).
?
Short for INCOMPLETE. It indicates that the origin of a
route is unknown and the route is learned by other
means. BGP sets Origin attribute of routes learned from
other IGP protocols to INCOMPLETE.
route is unknown and the route is learned by other
means. BGP sets Origin attribute of routes learned from
other IGP protocols to INCOMPLETE.
Table 291 Description on the fields of the display bgp ipv6 routing-table command
Field Description