3com MSR 20-20 참조 매뉴얼

peer { ipv4-address | ipv6-address } group group-name [ as-number as-number ]

undo peer ipv6-address group group-name

IPv6 address family view

group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.

ipv4-address: IPv4 address of a peer.

ipv6-address: IPv6 address of a peer.

as-number: Specifies the AS number of the peer/peer group, in the range 1 to 
65535.

Use the peer group command to add a peer to a configured peer group.

Use the undo peer group command to delete a specified peer from a peer 
group.

By default, the peer does not belong to any peer group.

# Create a peer group named test and add the peer 1:2::3:4 to the peer group.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv6-family

[Sysname-bgp-af-ipv6] group test external

[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-number 200

[Sysname-bgp-af-ipv6] peer 1:2::3:4 group test 

peer { ipv6-group-name | ipv6-address } ignore

undo peer { ipv6-group-name | ipv6-address } ignore

IPv6 address family view

ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.

ipv6-address: IPv6 address of a peer.

Use the peer ignore command to terminate the session to a peer or peer group.

Use the undo peer ignore command to remove the configuration.

By default, a router can establish sessions with a peer or peer group.