3com MSR 20-20 참조 매뉴얼

Any view

None

Use the display ospfv3 peer statistic command to display information about 
all OSPFv3 neighbors on the router, that is, numbers of neighbors in different 
states.

# Display information about all OSPFv3 neighbors.

<Sysname> display ospfv3 peer statistic

OSPFv3 Router with ID (1.1.1.1) (Process 1)

Neighbor Statistics

----------------------------------------------------------------------

Area ID

Down

Init

2-way

ExStar

Exchange Loading

Full

0.0.0.0

0

0

0

0

0

0

1

Total

0

0

0

0

0

0

1 

display ospfv3 [ process-id ] request-list [ statistics ]

Any view

process-id: OSPFv3 process ID, in the range 1 to 65535.

statistics: Statistics of link state request list.

Table 306   Description on the fields of the display ospfv3 peer statistic command

Area ID 

Area ID 

Down 

In this state, neighbor initial state, the router has not received any 
information from a neighboring router for a period of time. 

Init 

In this state, the router received a Hello packet from the neighbor but the 
packet gives no ID of the router. Mutual communication is not available. 

2-Way 

Indicates mutual communication between the router and its neighbor is 
available. DR/BDR election is finished under this state (or higher). 

ExStart 

In this state, the router decides on the initial DD sequence number and 
master/slave relationship of the two parties. 

Exchange 

In this state, the router exchanges DD packets with the neighbor. 

Loading 

In this state, the router send LSRs to request the neighbor for needed LSAs. 

Full 

Indicates LSDB synchronization has been accomplished between neighbors. 

Total 

Total number of neighbors under the same state