3com MSR 20-20 참조 매뉴얼

import-route { isisv6 process-id | ospfv3 process-id | ripng process-id | bgp4+ 
[ allow-ibgp ] | direct | static } [ cost value | type type | route-policy 
route-policy-name ]*

undo import-route { isis process-id | ospfv3 process-id | ripng process-id | bgp4+ | 
direct | static }

OSPFv3 view

isisv6 process-id: Specifies a process ID of ISIS to redistribute ISIS routes with the 
process ID, in the range 1 to 65535.

ospfv3 process-id: Specifies a process ID of OSPFv3 to redistribute OSPFv3 routes 
with the process ID, in the range 1 to 65535.

ripng process-id: Specifies a process ID of ripng to redistribute ripng routes with 
the process ID, in the range 1 to 65535.

bgp4+: Specifies to redistribute bgp4+ routes.

allow-ibgp: Allows redistributing IBGP route.

direct: Specifies to redistribute direct routes.

static: Specifies to redistributes static routes.

cost value: Specifies the cost for redistributed routes, ranging from 1 to 
16777214. It defaults to 1.

type type: Specifies the type for redistributed routes, 1 or 2. It defaults to 2.

route-policy route-policy-name: Specifies to redistribute only the routes that 
match the specified route-policy. route-policy-name is a string of up to 19 
characters.

c

Use the import-route command to redistribute routes.

Use the undo import-route command to disable routes redistribution.

IPv6 OSPFv3 does not redistribute routes from other protocols by default.

# Configure to redistribute routes from RIPng and specify the type as type 2 and 
cost as 50.

<Sysname> system-view

[Sysname] ospfv3

[Sysname-ospfv3-1] import-route ripng 10 type 2 cost 50