3com MSR 20-20 참조 매뉴얼

C

HAPTER

 85: IP

V

6 RIP

NG

 C

ONFIGURATION

 C

OMMANDS

display ripng process-id interface [ interface-type interface-number ]

Any view

process-id: RIPng process number, in the range of 1 to 65535.

interface-type interface-number: Specified an interface.

Use the display ripng interface command to display the interface information 
of the RIPng process.

If no interface is specified, information about all interfaces of the RIPng process 
will be displayed.

# Display the interface information of RIPng process 1.

<Sysname> display ripng 1 interface

Interface-name: Ethernet1/0

Link Local Address: FE80::20F:E2FF:FE30:C16C

Split-horizon: on

Poison-reverse: off

MetricIn: 0

MetricOut: 1

Default route: off

Summary address:

3:: 64

3:: 16 

Table 318   Description on the fields of the display ripng interface command

Interface-name 

Name of an interface running RIPng. 

Link Local Address 

Link-local address of an interface running RIPng 

Split-horizon 

Indicates whether the split horizon function is enabled (on: 
Enabled off: Disabled). 

Poison-reverse 

Indicates whether the poison reverse function is enabled (on: 
Enabled off: Disabled). 

MetricIn/MetricOut 

Additional metric to incoming and outgoing routes 

Default route 

■

Only/Originate: Only means that the interface advertises only 
default route. Originate means that the default route and 
other RIPng routes are advertised.

■

Off, indicates that no default route is advertised or the 
garbage-collect time expires after the default route 
advertisement was disabled.

■

In garbage-collect status: With default route advertisement 
disabled, the interface advertises the default route with metric 
16 during the garbage-collect time. 

Summary address 

The summarized IPv6 prefix and the summary IPv6 prefix on the 
interface