3com MSR 20-20 참조 매뉴얼
1340
C
HAPTER
87: M
ULTICAST
R
OUTING
AND
F
ORWARDING
C
ONFIGURATION
C
OMMANDS
multicast load-splitting
Syntax
multicast load-splitting { source | source-group }
undo multicast load-splitting
View
System view, VPN instance view
Parameter
source: Specifies to implement per-source load splitting.
source-group: Specifies to implement per-source and per-group load splitting
simultaneously.
simultaneously.
Description
Use the multicast load-splitting command to enable load splitting of multicast
traffic.
traffic.
Use the undo multicast load-splitting command to disable load splitting of
multicast traffic.
multicast traffic.
By default, load splitting of multicast traffic is disabled.
Example
# Enable per-source load splitting of multicast traffic in the public instance.
<Sysname> system-view
[Sysname] multicast load-splitting source
# Enable per-source load splitting of multicast traffic in VPN instance mvpn.
<Sysname> system-view
[Sysname] ip vpn-instance mvpn
[Sysname-vpn-instance-mvpn] multicast load-splitting source
multicast longest-match
Syntax
multicast longest-match
undo multicast longest-match
View
System view, VPN instance view
Parameter
None
Description
Use the multicast longest-match command to configure route selection based
on the longest match, namely based on the mask length.
on the longest match, namely based on the mask length.
Use the undo multicast longest-match command to remove the configuration
of route selection based on the longest match.
of route selection based on the longest match.
By default, routes are selected according to the order of route entries.