3com MSR 20-20 참조 매뉴얼

C

HAPTER

 90: PIM C

ONFIGURATION

 C

OMMANDS

Use the display pim claimed-route command to view the information of 
unicast routes used by PIM.

If an (S, G) is marked SPT, this (S, G) entry uses a unicast route.

# View the information of all unicast routes used by PIM in the public instance.

<Sysname> display pim claimed-route

Vpn-instance: public net

RPF information about: 172.168.0.0

RPF interface: Ethernet1/1, RPF neighbor: 172.168.0.2

Referenced route/mask: 172.168.0.0/24

Referenced route type: unicast (direct)

RPF-route selecting rule: preference-preferred

The (S,G) or (*,G) list dependent on this route entry

(172.168.0.12, 227.0.0.1) 

display pim [ vpn-instance vpn-instance-name | all-instance ] control-message 
counters [ message-type { probe | register | register-stop } | [ interface 
interface-type interface-number | message-type { assert | bsr | crp | graft | graft-ack | 
hello | join-prune | state-refresh } ]  * ]

Any view

vpn-instance-name: VPN instance name, a case sensitive string of up to 31 
characters.

all-instance: Specifies all VPN instances.

probe: Displays the number of null register messages.

register: Displays the number of register messages.

register-stop: Displays the number of register-stop messages.

interface interface-type interface-number: Displays the number of PIM control 
messages on the specified interface.

assert: Displays the number of assert messages.

bsr: Displays the number of bootstrap messages.

Table 336   Description on the fields of the display pim claimed-route command

RPF interface 

RPF interface type and number 

RPF neighbor 

IP address of the RPF neighbor 

Referenced route/mask 

Address/mask of the referenced route 

Referenced route type 

Type of the referenced route 

RPF-route selecting rule 

Rule of RPF route selection 

The (S,G) or (*,G) list dependent on this route entry 

(S,G) or (*, G) entries using this route