3com MSR 20-20 참조 매뉴얼

C

HAPTER

 90: PIM C

ONFIGURATION

 C

OMMANDS

Use the pim timer graft-retry command to configure the graft retry period.

Use the undo pim timer graft-retry command to restore the default setting.

By default, the graft retry period is 3 seconds.

# Set the graft retry period to 80 seconds on Ethernet1/0.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] pim timer graft-retry 80 

pim timer hello interval

Interface view

interval: Hello interval in seconds, with an effective range of 1 to 2,147,483,647.

Use the pim timer hello command to configure on the current interface the 
interval at which hello messages are sent.

Use the undo pim timer hello command to restore the default setting.

By default, hello messages are sent at the interval of 30 seconds.

timer hello (PIM view).

# Set the hello interval to 40 seconds on Ethernet 1/0.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] pim timer hello 40 

pim timer join-prune interval

Interface view

interval: Join/prune interval in seconds, with an effective range of 1 to 
2,147,483,647.