3com MSR 20-20 참조 매뉴얼

C

HAPTER

 6: ADSL I

NTERFACE

 C

ONFIGURATION

 C

OMMANDS

adsl standard { auto | g9923 | g9925 | gdmt | glite | t1413 }

ATM (ADSL) interface view

auto: Auto-negotiation mode.

g9923: ADSL2 (G992.3) standard.

g9925: ADSL2+ (G992.5) standard.

gdmt: G.DMT (G992.1) standard.

glite: G.Lite (G992.2) standard.

t1413: T1.413 standard.

Use the adsl standard command to set the standard applied to an ADSL 
interface.

Use the undo adsl standard command to restore the default, that is, 
auto-negotiation.

Note that:

■

ADSL-I module does not support G.Lite (G992.2) standard and T1.413 
standard.

■

To bring the standard configured by the adsl standard command into effect 
immediately, you need to re-activate the interface by either the shutdown and 
undo shutdown commands or the activate and undo activate commands.

# Apply the standard T1.413 to ATM interface 2/0.

<Sysname> system-view

[Sysname] interface atm 2/0

[Sysname-Atm2/0]adsl standard t1413

[Sysname -Atm2/0] shutdown

[Sysname -Atm2/0]undo shutdown 

adsl tx-attenuation attenuation

ATM (ADSL) interface view