3com MSR 20-20 참조 매뉴얼
1464
C
HAPTER
93: IP
V
6 PIM C
ONFIGURATION
C
OMMANDS
n
The default bootstrap timeout is 130 seconds, so the default bootstrap interval =
(130 - 10) / 2 = 60 (seconds).
(130 - 10) / 2 = 60 (seconds).
Related command:
Example
# Set the bootstrap interval to 30 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] c-bsr interval 30
c-bsr priority (IPv6 PIM view)
Syntax
c-bsr priority priority
undo c-bsr priority
View
IPv6 PIM view
Parameter
priority: Priority of the C-BSR, in the range of 0 to 255. A larger value means a
higher priority.
higher priority.
Description
Use the c-bsr priority command to configure the global C-BSR priority.
Use the undo c-bsr priority command to restore the default setting.
By default, the C-BSR priority is 0.
Related command:
Example
# Set the global C-BSR priority to 5.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] c-bsr priority 5
c-rp (IPv6 PIM view)
Syntax
c-rp ipv6-address [ group-policy acl6-number | priority priority | holdtime
hold-interval | advertisement-interval adv-interval ] *
hold-interval | advertisement-interval adv-interval ] *
undo c-rp ipv6-address
View
IPv6 PIM view
Parameter
ipv6-address: IPv6 address of the interface that is to act as a C-RP.
acl6-number: Basic IPv6 ACL number, in the range of 2000 to 2999. This IPv6 ACL
defines a range of IPv6 multicast groups the C-RP is going to serve, rather than
defines a range of IPv6 multicast groups the C-RP is going to serve, rather than