3com MSR 20-20 참조 매뉴얼

display pim ipv6 join-prune mode { sm [ flags flag-value ] | ssm } [ interface 
interface-type interface-number | neighbor ipv6-neighbor-address ] * [ verbose ]

Any view

mode: Displays the information of join/prune messages to send in the specified 
IPv6 PIM mode. IPv6 PIM modes include sm and ssm, which represent IPv6 
PIM-SM and IPv6 PIM-SSM respectively.

flags flag-value: Specifies to display IPv6 PIM routing entries containing the 
specified flag(s).Values and meanings of flag-value are as follows:

■

rpt: Specifies routing entries on the RPT.

■

spt: Specifies routing entries on the SPT.

■

wc: Specifies wildcard routing entries.

interface-type interface-number: Displays the information of join/prune messages 
to send on the specified interface.

ipv6-neighbor-address: Displays the information of join/prune messages to send to 
the specified IPv6 PIM neighbor.

verbose: Displays the detailed information of join/prune messages to send.

Use the display pim join-prune command to view the information about the 
join/prune messages to send.

# View the information of join/prune messages to send in the IPv6 PIM-SM mode.

<Sysname> display pim ipv6 join-prune mode sm

Expiry Time: 50 sec

Upstream nbr: FE80::2E0:FCFF:FE03:1004 (Ethernet1/1)

1 (*, G) join(s), 0 (S, G) join(s), 1 (S, G, rpt) prune(s)

PIM J/P hold interval 

Join/prune timeout time 

PIM BSR domain border 

BSR administrative scoping status 
(enabled/disabled) 

Number of routers on network not using DR priority 

Number of routers not using the DR 
priority field on the subnet where the 
interface resides 

Number of routers on network not using LAN delay 

Number of routers not using the LAN 
delay field on the subnet where the 
interface resides 

Number of routers on network not using neighbor 
tracking 

Number of routers not using neighbor 
tracking on the subnet where the 
interface resides

Table 358   Description on the fields of the display pim ipv6 interface command