3com MSR 20-20 참조 매뉴얼
1515
1024
S2/0
2
0
POP
NORMAL
----
1 Record(s) Found
display mpls interface
Syntax
display mpls interface [ interface-type interface-number ] [ verbose ]
View
Any view
Parameter
interface-type interface-number: Specifies an interface by its type and number.
verbose: Displays detailed information.
Description
Use the display mpls interface command to display information about a
specified or all interfaces with MPLS enabled.
specified or all interfaces with MPLS enabled.
Related command:
Example
# Display information about all interfaces with MPLS enabled.
<Sysname> display mpls interface
Interface
Status
TE Attr
LSP Count
CRLSP Count
Eth1/0
Up
En
0
0
Eth1/1
Up
En
0
0
# Display detailed information about MPLS-enabled interface Ethernet 1/0.
<Sysname> display mpls interface ethernet 1/0 verbose
No
: 1
Interface
: Eth1/0
Status
: Down
TE Attribute
: Disable
LSPCount
: 0
CR-LSPCount
: 0
FRR
: Disabled
Table 367 Description on the fields of the display mpls ilm command
Field Description
Inlabel Incoming
label
In-Interface Incoming
interface
Token
NHLFE entry index
VRF-Index VRF
index
Oper Operation
type
LSP-Type LSP
type
Swap-Label Label
for
swapping
Table 368 Description on the fields of the display mpls interface command
Field Description
No Sequence
number
Interface
Name of the interface