3com MSR 20-20 참조 매뉴얼
1521
display mpls ldp Isp
Syntax
display mpls ldp lsp [ vpn-instance vpn-instance-name [ destination-address
mask-length ] ] [ | { begin | exclude | include } regular-expression ]
mask-length ] ] [ | { begin | exclude | include } regular-expression ]
display mpls ldp lsp all [ | { begin | exclude | include } regular-expression ]
display mpls ldp lsp [ dest-addr mask-length ] [ | { begin | exclude | include }
regular-expression ]
regular-expression ]
View
Any view
Parameter
all: Displays information about all LSPs established by LDP.
vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31
characters.
characters.
dest-addr: Destination address of the LSP.
mask-length: Length of the mask for the destination address, in the range 0 to 32.
|: Filters the output information.
begin: Begins with the specified string.
include: Includes the specified string.
exclude: Excludes the specified string.
regular-expression: Regular expression, a string of 1 to 80 characters. No blank
space is acceptable.
space is acceptable.
Description
Use the display mpls ldp lsp command to display information about LSPs
established by LDP.
established by LDP.
Table 372 Description on the fields of the display mpls ldp interface command
Field Description
Interface Name
Name of an LDP-enabled interface
LDP ID
LDP identifier
Transport Address
Transport address of the entity, also used for TCP
connection
connection
Entity Status
Status of the entity, active or inactive
Interface MTU
MTU of the interface
Label Advertisement Mode
Label advertisement mode, DoD or DU
Configured Keepalive Timer
Value of the configured Keepalive timer
Configured Hello Timer
Value of the configured Hello timer
Negotiated Hello Timer
Value of the negotiated Hello timer
Hello Message Sent/Rcvd [X/Y]
X: Number of Hello messages sent from the interface
Y: Number of Hello messages received by the interface