3com MSR 20-20 참조 매뉴얼

MPLS LDP view

timer: Fault Tolerance (FT) reconnect time, in the range 60 to 300 seconds.

Use the graceful-restart timer reconnect command to set the FT reconnect 
time.

Use the undo graceful-restart timer reconnect command to restore the 
default.

By default, the FT reconnect time is 300 seconds.

Note that:

■

The FT reconnect time refers to the maximum time that the stale state flag will 
be preserved by the LSR after the TCP connection fails.

■

Modifying the FT reconnect time may cause all original sessions to be 
reestablished. LSPs based on the sessions will be removed and need to be 
reestablished.

# Set the FT reconnect time to 100 seconds.

<Sysname> system-view

[Sysname] mpls ldp

[Sysname-mpls-ldp] graceful-restart timer reconnect 100 

graceful-restart timer recovery timer

MPLS LDP view

timer: LDP recovery time, in the range 3 to 300 seconds.

Use the graceful-restart timer recovery command to set the LDP recovery 
time.

Use the undo graceful-restart timer recovery command to restore the 
default.

By default, the LDP recovery time is 300 seconds.

Note that:

■

The LDP recovery time refers to the maximum time that the stale state label will 
be kept by the LSR after a TCP reconnection.