3com MSR 20-20 참조 매뉴얼

display mpls rsvp-te sender [ interface interface-type interface-number ] [ | { begin | 
include | exclude } regular-expression ]

Any view

interface interface-type interface-number: Specifies an interface by its type and 
number.

|: Filters output by regular expression.

begin: Displays information beginning with a defined regular expression.

include: Displays information that includes a defined regular expression.

exclude: Displays information that excludes a defined regular expression.

regular-expression: Regular expression, a string of 1 to 80 characters without 
spaces.

Use the display mpls rsvp-te sender command to display RSVP-TE sender 
message information.

# Display the RSVP-TE sender message information on interface Ethernet 1/0.

<Sysname> display mpls rsvp-te sender interface ethernet 1/0

Interface Ethernet1/0;

Tunnel Dest: 29.29.29.29

Ingress LSR ID: 19.19.19.19

LSP ID: 1

Session Tunnel ID: 1

Session Name: Tunnel0

Previous Hop Address: 101.101.101.1

Token bucket rate: 0.0

Token bucket size: 0.00 

# Display the RSVP-TE sender message information on all interfaces.

<Sysname> display mpls rsvp-te sender

Interface: Ethernet1/0

Tunnel Dest: 19.19.19.19

Ingress LSR ID: 29.29.29.29

LSP ID: 1

Session Tunnel ID: 0

Session Name: Tunnel0

Previous Hop Address: 101.101.101.2

Token bucket rate: 0.0

Token bucket size: 0.00

Interface: Incoming-Interface at the Ingress

QOS service 

QoS guarantee/control 

Resv Message 

Reservation message received on a particular interface from next 
hop (X.X.X.X) 

Graceful Restart State 

State of GR: stale or normal. Displayed as --- when not supported by 
the device.

Table 401   Description on the fields of display mpls rsvp-te rsb content